Packaging assembly laboratory / Component placement / Dispenses Flux
Nordson Spectrum S-930
Supplier :
Model :
Purpose :
Dispense flux using non-contact jetting technique to allow proper solder oxide removal, wetting and tackiness prior to reflow
CAPABILITY:
JEDEC tray input/output
Max conveyor capacity 2.2 Kg
Digital pattern recognition system for optical registration of the dispense site
Compensation for rotational part misalignment +/- 7 ˚
Field of view 7 x 5 mm
Fluidmove software for precise control of dispensing pattern
X-Y accuracy +/- 0.050 mm, 3 sigma(+/- 0. 076 mm fast mode)
X-Y velocity 1 m/s, acceleration 1 g peak (S curve jerk control)
Dispense area (X-Y) 339 x 410 mm
Z accuracy +/- 0.025 mm, 3 sigma
Z travel 89 mm
Dual valve dispense control
Tactile height sensor
Low pressure/ low fluid sensor
Precision fluid regulator and air assist
DJ-2200 flux dispense jet with coaxial air technology
Flux wet film thickness as low as 5 µm ( material dependant)
Application rate 15 ips/sec at dispense width 5 to 7 mm
Good pattern edge definition 0.5 to 1.5 mm
Minimum overspray