CAPABILITY:

Non-contact marking technique

Jedec tray input/output in automatic mode

Semi auto mode using  fixturing

Printing area  315 mm x 315 mm

X-Y-Z-θ axis controlled with Siemens controller

X-Y marking starting position within 0.01mm

Line space within 0.025 mm

Marking angle auto correction compensate for marking direction

Adjustable Z axis maximum 35 mm for part and/or tray thickness

Axis speed 80 to 120 mm/sec typical

Marking orientation possible in all direction

Cie Vidéo Jet Excel HR ( High resolution )

Average pixel per inche  150

Memory available for 10 lines of 24 pixel high  (maximum 4mm)

Each line can be subdivided in two for a max of 20 lines  (12 pixels/line)

Maximum 255 pixels per line  (maximum 38 mm)

Meet ink permanency EIA/JESD22-B107  after ink cure (150˚C/1hr)

Typical surface: chip backside, Ni plated lid, anodized aluminum lid

Ceramic and organic substrate etc…

Black Videojet ink

Multiple fonts (Microsoft standard fonts .ttf, editable fonts .fnt)

Character size   1mm to 4 mm

Bar code 2D ECC 200 and    3 of 9

Capability for Logo

Serialization capability

Software Ink Jet Net DB2 on PC.